EXPLOSIVE DEVICES
This section is on how to make
your own explosive devices. Note: these are extremly dangerous
and should be handled very carefully with all due safty precations and
equipment! All of these explosives can throw shrapnell, gravel, earth, rocks,
etc., which can all kill you much like a bullet. They are not weapons or toys
and are for industrial purposes or as a pyrotechnic device only.
Low Order
These low order explosives explode by undergoing
oxidation, or they burn. But unlike most flammable materials the fules and
oxidizers used in low order exlosives burn and produce heat, light, and gas at an
extremely fast rate so that when confined they explode. They can be used to
detonate certain more sensative high order explosives. High order explosives detonate. They detonate in
most casses by shock, not by flame or heat.
CRATERMAKER
- co2 cartrige empty or not
- bp
- drill
These are real easy to make and fun. First, Drill hole in
the top of the cartrige, if it already isn't used look for a small dent. The
size of the hole should be about 3/8 or bigger. Then our in the bp and put the
fuse in. You may have to shack it around to get the fuse in all the way. Then
use hot glue to seal it. Lite it and get away. Watch out
for shrapnell, lite these away from anybody like in a field. |
PIPE 'BOMB'
- threaded pipe
- pipe end caps that you can screw on
- explosive powder
- fuse
- drill
First drill a hole in the pipe and screw on one of the end caps. Put the fuse in and pour in the explosive powder. Screw on the second end cap and lite. This one is one of the more dangerous ones and you should be
very carefull with it. It throwes alot of shrapnell and can easily blow your
hand off. Some people thought these are "BOMZ" good for blowing people
and property up, and thanks to the media, now everybody deos too. But there not.
So take care. |
PIPE CHARGE
I call this a pipe charge because it's too small to be a pipe bomb. Drill a hole
in a small pipe about an inch in diamiter and a few inches long. Crimp the ends
with a clamp or vise or something. Put the bp in through the hole you made, and
stick in the fuse. You won't want to put the bp in before you crimp the 2nd end
like I wish because the force might set of the explosive powder. Watch out for shrapnell. |
High Explosives
Comming soon...